The MAGURA MTe 3-finger lever is a high - quality closer. When you squeeze the lever blade for braking, the circuit closes, and when you release it, the circuit opens. This forged alloy lever blade is designed so that three fingers can easily rest on it. It has a ball - end for safety during a crash. The cable running to the 2 Pin Higo connector is 150mm long, and the brake comes with a 2 Pin male Higo connector. This lever is suitable for Carbotecture Brake Masters including MT30, MT Sport, MTS, MT4, MT5, and MT Trail Sport Models. Thanks to the Carbotecture® technology in the brake handle housing, the MT5e's weight is minimized while providing optimal braking performance. Note: This is just the lever and does not include the master cylinder.

Using this Magura 3 - finger lever is simple. When you need to brake, just squeeze the lever blade with three fingers. This will close the circuit and activate the brakes. When you release the lever, the circuit will open, and the brakes will disengage. Here are some things to keep in mind. First, be careful not to apply too much force suddenly as it may cause a harsh stop. Second, since the lever has a ball - end for safety, it's designed to reduce the risk of injury in case of a crash, but still ride safely. For maintenance, regularly check the 150mm cable running to the 2 Pin Higo connector. Make sure it's not frayed or damaged. If you notice any issues with the cable or the 2 Pin male Higo connector, it's a good idea to get them replaced. And remember, this product is just the lever, so don't expect it to come with a master cylinder.