This DIY LED light kit for 6 X 4 trailers uses the new LEDLink™ plug-and-play system. It's a complete solution that gets rid of the need for cutting, soldering, or joining trailer wiring. Just mount the lamps, push in and twist the waterproof LEDLink™ connectors, cable tie the harness to the chassis, and you're all set! It comes with everything you need: a plug-and-play wiring harness, a pair of rear combination lamps, a licence plate lamp, and both 7-pin flat and 7-pin large round trailer plugs. The LEDLink™ trailer kits are super easy to install, always result in a perfect setup, and protect the whole trailer lighting system from corrosion and water. Installing trailer lamps has never been this hassle - free! Easy to fit: It's a complete DIY plug-and-play kit that's suitable for the average home handyman. You only need basic tools for installation. There's no crimping, soldering, or wire joining. The twist - lock plugs offer a secure connection. It's waterproof with internal O - ring seals and prevents harness corrosion from moisture. All components are ADR approved and it's suitable for 6x4 trailers, Mo - Tow bike carriers, and mobility scooter carriers. Includes: Plug & play harness, a pair of rear combination lamps, licence plate lamp, 7 - pin flat and 7 - pin round trailer plugs.

Using this DIY plug - and - play LED light kit for your 6 X 4 trailer is a breeze. First, mount the lamps in the appropriate places on your trailer. Then, take the waterproof LEDLink™ connectors, push them in and twist them to make a secure connection. After that, use cable ties to attach the harness to the chassis of the trailer. That's it for the installation! Remember, you only need basic tools like a screwdriver for mounting. When handling the twist - lock plugs, make sure to twist them firmly to ensure a good connection. Also, since the kit is waterproof, it can withstand normal exposure to water, but try to avoid submerging it for long periods. For maintenance, regularly check the connections to make sure they're still tight. If you notice any signs of moisture or corrosion, clean the affected parts gently with a dry cloth. This way, your trailer lighting system will keep working well for a long time.