The SpeedBox 3.0 is a third - generation smart chip designed specifically for the Haibike FLYON model line. This amazing tuning chip lets you choose your own speed limit. Once installed, your e - bike's display will show real data like maximum and average speeds, daily mileage, and cruising range. You can activate the tuning chip through the e - bike's control unit. To switch between two assistance modes, use the → ← → ← button sequence. The actual speed limit will briefly show on the display, and the motor will support you up to that speed. To deactivate the tuning kit, use the same button sequence. The cadence value of 25 rpm will appear on the display, and the speed limit will reset to 25 km/h. You can gradually set the maximum speed of electric assistance by changing modes: EXTREME - HIGH - MID - LOW - MID - HIGH - EXTREME. The actual speed limit will be displayed, and you can switch it by turning the rear wheel about 180°. Different cadence values on the display correspond to different speed limits. The last displayed limit is saved after 5 seconds of inactivity. Installation is a breeze as the SpeedBox uses original connectors. We've prepared detailed instructions and videos. If you're installing it on a new bike, ride it for at least 1 km before activating the chip. But be aware, operating modified e - bikes with this chip on public roads may be illegal in some countries. The manufacturer isn't responsible for damages. E - bikes with SpeedBox can only be used on private property at your own risk, and it may void your e - bike's warranty. We recommend using safety features and protective gear.

Using the SpeedBox 3.0 on your Haibike FLYON e - bike is quite simple. First, when you install it, since it uses original connectors, the process is easy. We have detailed instructions and videos to help you. If you're putting it on a brand - new bike, ride it for at least 1 km before activating the chip. To activate the tuning, use the → ← → ← button sequence on your e - bike's control unit to switch between two assistance modes. The actual speed limit will show on the display, and the motor will support you up to that speed. To turn off the tuning, use the same button sequence again, and the speed limit will go back to 25 km/h. You can set your preferred maximum speed of electric assistance by changing the modes gradually. Just turn the rear wheel about 180° to switch the speed. Remember, the cadence values on the display tell you the corresponding speed limits. After 5 seconds of not making any changes, the last speed limit you set will be saved. But here are some important things to note. In some countries, it may be against the law to use your e - bike with this chip on public roads. The manufacturer won't be responsible for any damages if you use it. You can only use your e - bike with the SpeedBox on private property at your own risk. Also, using this chip might void your e - bike's warranty. Always use safety features and wear protective gear to stay safe while riding.