Discover the all-new TranzX EDP01 wireless electronic dropper seat post with Bluetooth connection. This innovative post eliminates the need for a cable from the dropper lever to the post, making installation a breeze and reducing future maintenance. If you love simplicity and trust the reliability of TranzX, this is the perfect dropper for you.
Quick specs:
- Travel: 150 & 170mm
- Diameters: 30.9 & 31.6mm
- Sealed adjustable air cartridge
- Bluetooth 5.0 wireless connectivity
- Automotive grade IPX 6/6-rated water resistance
- Rechargeable lithium-ion battery
- 0mm offset post head with a secure 2-bolt saddle clamp
- Weights: 730 - 748g depending on diameter, measured with 200mm travel version
- Lever remote uses a common CR2032 battery (not included)
What's Included:
- EDP01 wireless dropper post
- EDP01 remote lever w/ 22mm clamp
- EDP01 rechargeable battery
- EDP01 charging case
- Required charging cables
- CR2032 battery for remote
The Battery:
- Battery Voltage: 7.4V (nominal)
- Battery capacity: 240mAh
- Battery size: 40.5 * 19.0 * 21.2mm
- Battery weight: 20.5g
- Estimated range: Over 6,000 times per fully charged battery (continuous activations)
The Charger:
- Charge voltage: 8.4V
- Charge current: 240mA
- Charge time: approx. 90 minutes
- Power source: 5Vdc, USB powered
- Plug type: USB Type-C


Using your TranzX EDP01 wireless electronic dropper seat post is easy. First, install the post into your bike frame. Make sure to choose the right diameter (30.9 or 31.6mm) for your bike. Then, attach the remote lever with the 22mm clamp to a convenient spot on your handlebars. Don't forget to insert the CR2032 battery into the remote (battery not included).
To adjust the seat height, simply press the button on the remote. The Bluetooth 5.0 connection allows for a seamless and quick adjustment. You can choose between 150mm and 170mm of travel depending on your needs.
When it comes to the battery, charge it using the included charging case and cables. The battery has a voltage of 7.4V and a capacity of 240mAh. It takes about 90 minutes to fully charge. You can expect over 6,000 continuous activations per full charge.
For maintenance, the post has an automotive grade IPX 6/6-rated water resistance, which means it can handle some splashes and wet conditions. However, it's still a good idea to keep it clean and dry. Check the sealed adjustable air cartridge regularly to make sure it's in good condition. Also, make sure the 2-bolt saddle clamp is tight to keep your saddle secure.