Introducing the reliable third - generation Speedbox 3.0 tuning chip designed specifically for e - bikes with Giant 2017 - 2022 motors (except the SyncDrive Pro motor with RideControl Go). This amazing chip can suppress the speed limiter on your electric bike.
Once installed, your e - bike's display will show real - time data, including maximum and average speed, daily mileage, and cruising range. It's like having a high - tech assistant on your bike!
How Speedbox 3.0 Works
Activate the tuning kit right on your bike's controller. Press the WALK button, and a 9.9 km/h (6.2 mph) value will appear. After that, you can reach speeds of 40 km/h, 50 km/h, or even over 60 km/h! To deactivate, just press the WALK button again. A 2.5 km/h (1.6 mph) value will show up, and the speed limit will reset to 25 km/h. Your e - bike will then operate as it did before chip installation.
If your e - bike doesn't have a classic control unit with a Walk button, use the + - + - button combination to activate SpeedBox. You can deactivate it in the same easy way.
Set the maximum speed of electric assistance by switching modes three levels down and then three levels up. The actual speed limit will be displayed. You can also switch the maximum speed by briefly pressing the WALK button or turning the rear wheel 360°. For example, 1.5 km/h on the display means a 15 km/h limit, 2 km/h means 20 km/h, 2.5 means 25 km/h, 3.0 means 30 km/h, and 9.9 means 99 km/h. The last limit shown will be saved after 5 seconds of inactivity.
Assembly
Connecting the SpeedBox chip to your e - bike is a breeze! The connectors are color - coded for simple installation. We've prepared detailed instructions and videos to help you out. Disassembling the tuning chip is just as easy. If you face any installation or disassembly issues, don't hesitate to contact us.
If you're installing SpeedBox on a brand - new bike, ride it for at least 1 km before activating the chip.
Find detailed installation information here: text, graphic
Warning
Be aware that using a modified electric bike with SpeedBox on public roads may be illegal in some countries. The manufacturer isn't responsible for damages from using SpeedBox products. E - bikes with SpeedBox can't be used on public roads, cycling paths, or public places. They're for private property use only, at your own risk. Using SpeedBox may void your e - bike's warranty.
We highly recommend using other safety features and protective gear to prevent injuries.
The Speedbox 3.0 is a great tuning chip for your Giant e - bike. To use it, you can activate the tuning kit on your bike's controller. Press the WALK button to start enjoying higher speeds. If your bike doesn't have a Walk button, use the + - + - combination. To set the maximum speed of electric assistance, switch modes three levels down and then three levels up. You can also change the speed limit by pressing the WALK button briefly or turning the rear wheel 360°. When installing the chip, it's easy because the connectors are color - coded. We've got instructions and videos to help. If you have a new bike, ride it for at least 1 km before activating the chip. But be careful! Using a modified e - bike on public roads may be against the law in some places. It can only be used on private property at your own risk, and it might void your bike's warranty. Always wear protective gear for your safety.
